Wood Fences San Ramon: What Treatment is Needed for a Wood Fence?

Now that you have a brand-new wood fence in San Ramon, you may be curious about how to maintain its appearance. A good fence contractor will provide you excellent ideas on how to treat or care for your new wood fence to maintain its new look for many years. However, you can also treat your new fence by yourself by considering some tips listed below in this article.

Depending on the type of wood fence you have, the treatment will also vary. If your fence is made out of natural wood, you may apply different treatments, and another different treatment may be applied if you have fences made out of treated and lumber. Adding waterproofing treatment will work for any kind of wood used for your fence. This will preserve the wood's condition. Waterproofing treatments come in clear or colored stains.

• Clean off the dirt or debris from the boards with a simple stiff broom and water. Let the fence dry thoroughly before adding treatment to it.
• Cover the ground around or under your fence with a drop cloth, and provide any weights to keep it from being blown up in the wind. This is needed because the chemicals found in the treatments are caustic and can cause damage to your plants and grass around your fence. Consider the waterproofing you will be using, whether it is water- or oil-based. You will also want to be sure to add the appropriate amount of liquid for thinning, and follow the instructions on the product.
• For easier coverage, use a medium-sized nap roller to apply any treatment to the fence. Start at the top of the fence and work down. Be sure to go over each section of the fence to make sure that waterproofing permeates through the wood.
• Take the time to wash and clean the roller covers and any paintbrushes you used in mineral spirits after you are finished. Clean them using your ordinary dish soap and warm water to make sure that they will be ready to for use again.

These steps might be easy for any DIY homeowner to treating their new fences. You can purchase a waterproofing treatment, which cost less than $20 in many locations. Or you can discuss about this with a professional fencing contractor who installed your wood fence in San Ramon to see how much they will charge to treat the fence.

Wood Fence Walnut Creek – Let All American Fence Corp Help You Choose a Wood Fence Stain

Installing a wood fence at your Walnut Creek home is a sizable job. You may have spent a good amount of money to have the fence installed. You understand that the color on the fence will fade, so you’ll want to know what the best stain is to use when it is time to re-stain. Let All American Fence Corp help you decide which wood stain is best for your Walnut Creek wood fence.

Some homeowners decide they don’t like the color of their wood fence, and will choose to stain it before it is needed. Others will simply want to reapply a stain to help spruce the color up. However, the best reason to stain a wood fence is for protection from the elements. Sunlight and moisture can make the color fade and eventually damage the wood. Use these suggestions to choose the stain for the wood fence around your property.

• Consider your house and landscape. Most likely you will want a stain that closely matches the other colors. You don’t want your fence to clash with your home or surroundings; you want others to notice its beauty.
• Pay attention to how your property looks at various times of the day. Taking pictures will help you notice how the colors appear around your home – the exterior paint, shutters, doors, bricked areas – look throughout the day. All American Fence Corp can help you choose the stain that is best for your wood fence on your Walnut Creek property.
• Woods stain differently, so when you get samples of the stains you like, ask the paint company or home improvement store to supply samples painted on the wood for your fence type. Bring the samples home with you and compare the samples with the other colors on your property.
• Use stains that will protect the wood. You’ll want to choose a waterproof stain to help avoid water damage to your wooden fence. This type of stain will also have an ultraviolet protection which will stop the color from fading. You may want to use a darker stain since it will protect against ultraviolet better than lighter stains. Choose a stain that is also mildew-resistant.
• Semi-transparent stains or solid color stains are available. Semi-transparent stains allow the wood grain to be visible and can be striking. Solid stains, on the other hand, will mask or cover the wood grain so it is not visible.
• Oil-based exterior are made with linseed oil, alkyd resins, or Tung oil. They also contain pigments and stabilizers. Water-based stains are made from acrylic resin or latex. They also contain stabilizers and pigments. Generally, a water-based stain will last longer than any oil-based stain you might choose.

You want to use the best stain when resurfacing the wood fence around your Walnut Creek home. All American Fence Corp, whether or not they installed the fence, will have suggestions for the best type of stain to use. With over 20 year’s experience, they not design and install fences; they understand wood fences and how to stain them. Call them at 925-743-8583 to learn about what stain is best for your wood fence in Walnut Creek.

Keep Dogs from Digging under Your Chain Link Fence in San Ramon

Many homeowners have dogs digging under chain link fences at San Ramon properties. It is easy to understand that they would be frustrated. They want to keep their dogs inside their yard and other animals out. We offer several suggestions on ways to keep your pet from digging under your San Ramon chain link fence.

Dogs dig instinctively for a number of reasons:

• They want to hide something from other animals
• They want to find something that has been hidden underground
• They want to find someplace cool or to create a den
• They are tired of being where there isn’t activity
• They want to chase another animal or to be with dogs that are running free

When you see your dog dig, their purpose isn’t to make owners angry at them, they are simply doing an activity that is natural and inbred.

Veterinarians suggest using Dig Defence which is welded wire that can be hammered into the ground around the area where dogs dig. You may need this product in one precise location or hammered into the ground for the entire fence. It is suggested that you do homework to decide if this option is right for your property and your budget. You can also use tent stakes hammered through the lowest chain link fence links.

You might also want to buy chicken wire to place where your dog digs. Choose 24 inch high chicken wire and dig into the ground where your pooch is trying to escape. The goal is to bury about 12 inches of wire into the ground. Attach the wire above ground to the fence by using zip ties or coated wire. When the dog tries to dig in their favorite spot, it will not feel good and they will stop. You may need to repeat this in new spots they may decide to dig.

If you know your dog is going to dig, why not give them someplace that they CAN dig? Choose an area several feet wide, deep and long. Dig the area up and fill it with a combination of dirt and sand. This will be easier for your furry friend to dig into. You can bury snacks or one or two of their toys to encourage them to dig in only that location. Obviously, this may not be an option that is feasible for every family, but it might work for some.

Make sure your dog has shelter within your fenced yard. If there is inclement weather, or it is unbearably hot, the shelter will get them out of the heat and rain. You will also want to have toys your dog can play with while they are alone in your yard. It is also recommended that you play with your dog while it’s in the yard and that it is taken for a walk occasionally. If your dog understands that you will pay attention to it daily, they may have fewer reasons to dig around the fence.

These are only a few of many options you may find about keeping your dog from digging under your chain link fence in San Ramon. You may be able to find other options, but these are at least a few to consider if your dog has been digging around your fence.

Pick a Fence Contractor for a Variety of Fences and Locations

Choosing a fence contractor can be daunting, whether you are looking for a residential wood fence in Pleasanton, an iron fence in Danville, a chain link fence in the Bay Area, or all three at the same time! How do you find the contractor that you need to choose to complete the work most efficiently at the best price?

The first thing you will want to do is find a fence company whose location is within a reasonable distance from the location or locations where you need the fence or fences installed. If one of the properties is farther away than the others, be sure to check with the contractors you contact to be sure they are willing to travel to the location to do the installation. This requirement, in itself, will help you to narrow down your choices for a fencing company.

Once you have narrowed down your choices, you will want to talk to the companies, checking on such things as their credentials (be sure they are licensed; ask for references). You will want to know if the company treats customers fairly and professionally.

If you are planning to have different kinds of fences installed, find out if the contractor handles all the kinds of fences you desire. You may want to find out if they have experience installing the different varieties of fencing. A good fencing contractor can help you to determine which type of fence is best for the property around which you want it, and knowing the purpose for your fence will also be of assistance in determining the best possible choice.

If you want to protect your property, any of the fences can be sufficient. Naturally, a wrought iron fence is going to be a bit sturdier than a wood fence and a chain link fence or iron fence may be less of a screen than a wooden fence (depending on how open your wood fence may be). Privacy fences are usually wooden, so that may be the direction you want to choose. If you want a touch of elegance for your property, an iron fence is probably a good choice.

When you are looking for a fence contractor to install a variety of fences in different places, whether it is a residential wood fence in Pleasanton, an iron fence in Danville, a chain link fence in the Bay Area, or any combination of them, remember to know your application and ask the right questions before making your decision.

Are Walnut Creek Fence Companies As Good as Those in the Bay Area

All fence contractors are not equal. Most of the time, fence companies in Walnut Creek and fence contractors in the Bay Area can do the same jobs, and they generally use the same materials. Are the companies in Walnut Creek better than the contractors in the Bay Area?

In order to determine the answer to this question, you will need to ask more questions. You may want to make an appointment to speak in person with the contractor or contractors about which you want to find out more. Speaking with the fence contractors will help you determine the answers to your questions.

Some of the things you will want to find out from the fence contractor include the following:

• What is the quality of the materials used in the fences the company installs? If they use cheap materials, the fence will not last as long. This is not to say the fence materials must be expensive, but that you want them to be of good quality. Many fence companies in Walnut Creek and fence contractors in the Bay Area have their own lumber yard, so that may help save money.
• What technique is used to install the fence you want on your property? Knowing the techniques employed by the company will give you some insight into the company’s work ethic and the likelihood of the installation lasting longer.
• Does the contractor have experience? Is the experience specialized or general? How much experience do they have?
• Will the company answer your questions? If the contractor beats around the bush and evades the questions you ask, you may want to consider a different company. A good contractor will be specific and give you as much information as you need to make your decision, and maybe even a little more.
• How do you choose the best fence for your property? A good company can listen to your plans and help you to determine the best option of material, height, color, and other selections.
• What is the time frame to expect from the company when installing a fence? While some fences may be larger than others, an average fence will take from one to three days to install. If the company regularly takes weeks to complete a job, the contractor is overextended and you will want to find someone who manages their time and work staff more efficiently.
• Will the final price match the estimate given? A good quality company will give you an estimate, and a competent contractor will be detailed and will be able to give you an estimate that will match the final price. If the contractor will not guarantee that the cost will match the estimate, you may want to keep looking.
• Does the company make a point of being punctual? We all have our own lives, and we appreciate it when a contractor is courteous regarding that fact.

While these are not the only things you will want to know before choosing between fence companies in Walnut Creek or a fence contractor in the Bay Area, they will give you a good start on gathering the needed information to make a wise decision.

Residential Wood Fence Pleasanton – Knowing When It Is Better to Repair or Replace Your Wood Fence

When you have a residential wood fence around your Pleasanton yard, you have an area that is more safe and private and that increases the value of your property. It can also be beautiful, even while being functional. However, wood is organic, and it will not last forever, much as we might like it to. Wood fences will eventually rot, warp, or even fall apart. When this begins, repairs should be made, and sometimes this will mean replacing all or part of the fence.

Broken fences are no longer as secure and private, and they do not look good. If you ignore small bits of deterioration in the fence, larger areas can develop until the whole fence may come down. If you have enough time and the right tools and knowledge, you can repair or replace the fence yourself. Even if you have the skills, you may want to hire a professional because it will ensure the job will be done in a way that will last the longest possible. The right fence contractor in Pleasanton can also provide you with instructions on how to care for your wood fence to keep it looking good and maintaining privacy for years to come.

When you examine your residential wood fence for damage, things to look for are splinters, warped areas, and changed colors. If you can catch them at this stage, repair should be relatively simple and involve no more than changing out planks or panels (depending on your fence’s original construction). When the climate where you live is more humid, decay is more likely to occur – and to spread quickly. If you make sure your wood fence is properly sealed, decay will be much slower and repairs and replacements should happen much less often.

You should note that replacement planks or panels will not exactly match the fence once it has been there for some time, as the wood weathers and changes over time. Replacements will stand out, so catching potential damage before it gets bad can allow you to repair without replacing, helping to keep the overall uniformity of your residential wood fence.

If your fence begins to lean, you may need to reseat or replace the supporting posts. This is another area where catching it early is to your advantage. If you catch the fence just as it begins to lean it will allow you to adjust and support the posts when they are just slightly tilted, rather than having to dig up and replace entire supports once they are nearly fallen over. Fallen supports can also cause damage to the fence planks or panels as well, causing warping or breakage.

If you need help with repairing or replacing your residential wood fence in Pleasanton, feel free to call us at 925-743-8583 for an estimate.

Iron Fence Danville – Should You Paint an Wrought Iron Fence?

Installing an iron fence to your Danville property will add value to the property, giving it a stately look and feel. Many home and business owners choose wrought iron because it is durable. It can also come in many different sizes and shapes. The right iron fence company will be able to custom design a fence to suit your desires.

Wrought iron has been used since sometime in the middle ages. It has been used to build bridges, ships, trains, and, of course, fences. Wrought with skill by blacksmiths for many hundreds of years, iron was beaten into shapes with heat and force. The designs available in wrought iron fencing make it a very popular choice among homeowners. You can get simple designs, or with the right wrought iron artist, something that is more unique.

While a nice wrought iron fence looks elegant when it is new and fresh, wrought iron is particularly susceptible to rusting, if it is not properly treated. An old fence that is rusting should not be left alone; it will continue to damage the fencing and rust could eat through it. However, it is actually not that difficult to maintain wrought iron fencing. Once the fence has been sanded and painted, regular polishing with a high quality wax, such as car wax, will help to keep the paint in place, keep rust out, and keep the fence looking like the elegant, high quality item that it is. Wrought iron fences can very possibly last longer than the property’s owners, if cared for properly.

The proper way to repaint an iron fence is to scrape any loose paint from it, using a wire brush and coarse sandpaper. Once the fence is clear of loose paint and dirt, a good primer that is made to prevent rust is a good idea. Let the primer dry completely, which may take a few hours, since a good rust-prevention paint is usually going to be oil-based. When it is completely dry, add a coat of a rust-retardant top coat. Again, it is likely to be oil-based, so the whole project will take some time, but using a good quality rust-retardant primer and paint will help the paint job to last longer before it will need to be redone.

The right fence contractor in Danville will be able to explain how best to maintain an iron fence they install. They will explain how to keep the fence from rusting and give direction on what to do if the fence needs to be repainted or touched up.

If you would rather not put the time and energy into doing the job yourself, you can reach out to any painting company to do the work for you. As you can tell, proper maintenance is the key to keeping your iron fence looking great. It isn’t difficult to do. If you have been considering installing an iron fence at your Danville home, call us at 925-743-8583 to get an estimate.